Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Micro

Edit approved by Micro

Before
After
Unchanged

Step Lines

[title] Plate Identification
[* black] The picture in this section will help you identify the plate parts in the MM3 build.
[* black] You can select pictures in the bar above to bring to main focus. You can then click on the picture to see a larger version.
[* blue] * The Top Deck Side Plates "I" are now two pieces on each side. The pictures in the guide are showing the beta version. The production version will be two.
[* blue] * The Top Deck Side Plates "I" are now two pieces on each side. The pictures in the guide are showing the beta version. The production version will be two.
[* icon_note] Included in the kit will be some small metal pieces for the extruder as well as the belt clamp for the bed plate. These parts may be still attached to a carrier metal plate and have to be removed.
[* black] Removal is accomplished by hitting the small part in the carrier so one side can be grabbed with pliers and then flex back and forth until it breaks free of the carrier.
[* icon_note] Included in the kit are some long bent plates that are not shown in the parts list above. There are 4 of these plates and they look very similar to the Stiffener Plates. These are used to mount the PSU and Rambo.
[* black] Part F in the picture has been modified for the production version. Part F for the Z motor mount looks almost identical to part E. There will be two of these plates.
[* black] To better protect the plates during shipping several of them are packaged in different boxes and plate wraps. Please open every box and bag to check for your plates!