Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Micro

Edit approved by Micro

Before
After
Unchanged

Step Lines

[title] Z Assembly Part 2
[* black] Insert wisdom hereYou can now attach the X assembly to the Z section. You will use 4 m5-10 screws and nuts for attachment. Loosen the 90 degree brackets on the X and slide to align. The 90 degree brackets mount to the outside edge of the Z plate.
[* black] Insert wisdom hereYou can now attach the X assembly to the Z section. You will use 4 m5-10 screws and nuts for attachment. Loosen the 90 degree brackets on the X and slide to align. The 90 degree brackets mount to the outside edge of the Z plate.