Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Micro

Edit approved by Micro

Before
After
Unchanged

Step Lines

[title] Y Axis Part 4
[* black] Insert wisdom hereTo install the belt put both ends of the belt into the hole in the belt offset piece. Fold the belt over on the top of the bed and secure with the small belt clamp. This clamp screws to the bed with M3-6 button heads.
[* icon_caution] Route the belt as show in the picture in this section. loosen the belt clamp to take up the slack of the belt. Do not trim the belt
.
[* black] Insert wisdom hereTo install the belt put both ends of the belt into the hole in the belt offset piece. Fold the belt over on the top of the bed and secure with the small belt clamp. This clamp screws to the bed with M3-6 button heads.
[* icon_caution] Route the belt as show in the picture in this section. loosen the belt clamp to take up the slack of the belt. Do not trim the belt
.

Image 2

No previous image

Added

Image 3

No previous image

Added