Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Micro

Edit approved by Micro

Before
After
Unchanged

Step Lines

[title] Extruder Assembly Part 2
[* black] Install the brass hob on the stepper motor shaft.
[* black] Install the completed
completed lever arm to the extruder body with a m3-18 screw using a washer next to the screw head. Use thread lock on this screw. Tighten but leave loose enough so the lever arm can move.
[* black] Install the Brass hob onto the stepper motor shaft. You will need to squeeze the lever arm down to do this step.
[* black] Install the brass hob on the stepper motor shaft.
[* black] Install the completed
completed lever arm to the extruder body with a m3-18 screw using a washer next to the screw head. Use thread lock on this screw. Tighten but leave loose enough so the lever arm can move.
[* black] Install the Brass hob onto the stepper motor shaft. You will need to squeeze the lever arm down to do this step.