Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Micro

Edit approved by Micro

Before
After
Unchanged

Step Lines

[title] T-Nut proper installation
[* black] The T-nuts are installed with the protrusion toward the extrusions. The kit may include the following type of T-nut as well. This is called a post install nut and is very handy when you forget to get a T-nut in an extrusion. This T-nut can be installed at any time.
[* black] There are three types of T-Nuts that may be included with your kit (Shown in picture 2). Either the Blue or Purple can be used for general asssembly (the ends of the purple t-nuts may or may not be tapered).
[* black] The Green box shows a Post Install Nut that you can place the T-nut into the extrusion and roll into place until the the small roller balls centers on the groove in the center of the extrusion.These allow you to add a nut after you have installed a particular extrusion.
[* blackicon_caution] The picture showing the T nuts installed in the extrusion shows the correct way to install them and is highlighted.''' Method circled in RED is the Wrong way.'''
[* blackicon_caution] The picture showing the T nuts installed in the extrusion shows the correct way to install them and is highlighted.''' Method circled in RED is the Wrong way.'''