Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Micro

Edit approved by Micro

Before
After
Unchanged

Step Lines

[title] Y Axis Assembly
[* black] Insert wisdom hereadd 5 T-nuts in bottom of left extrusion, 4 in bottom of right line up the 2 extrusions slide 8 T-nuts in top of each extrusion install V Wheel rails, with plate on top using m5-8 screws with washers, leave slightly loose Use the top deck plate to align the T-nuts in the two extrusions to line up the holes for the top plate/ V-rail / T-nuts.
[* black] Place the two long V rails on top of the two extrusions
.
[* black] Insert wisdom hereadd 5 T-nuts in bottom of left extrusion, 4 in bottom of right line up the 2 extrusions slide 8 T-nuts in top of each extrusion install V Wheel rails, with plate on top using m5-8 screws with washers, leave slightly loose Use the top deck plate to align the T-nuts in the two extrusions to line up the holes for the top plate/ V-rail / T-nuts.
[* black] Place the two long V rails on top of the two extrusions
.

Image 1

No previous image

Added

Image 2

No previous image

Added