You're viewing the latest revision of this guide.

Older
Jan 30, 2015 - 11:01:30
Jan 30, 2015 - 11:01:30 Jan 30, 2015 - 11:01:19 Jan 30, 2015 - 11:01:19 Jan 30, 2015 - 10:01:51 Jan 30, 2015 - 10:01:51 Jan 30, 2015 - 10:01:08 Jan 30, 2015 - 10:01:22 Jan 30, 2015 - 09:01:19 Jan 30, 2015 - 09:01:03 Jan 30, 2015 - 09:01:02 Dec 28, 2014 - 09:12:57 Dec 28, 2014 - 09:12:18 Dec 28, 2014 - 08:12:56
Newer

V Slot Wheel Assembly & Adjustments

Written By: Micro (and 2 other contributors)
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

1

Flags

1

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

  2. The wheel assembly order is bearing, wheel, insert washer, bearing. Use a table and something hard to press it together. Use a table and something hard to press it together.

    • The wheel assembly order is bearing, wheel, insert washer, bearing.

    • Use a table and something hard to press it together.

  3. The eccentrics use a regular and special washer on the plate side. The eccentrics fit in the larger plate hole. Wheels using spacers do not use any washers. The X and Y wheels mount with the nut against the wheel as shown in the second picture.

    • The eccentrics use a regular and special washer on the plate side.

    • The eccentrics fit in the larger plate hole. Wheels using spacers do not use any washers.

    • The X and Y wheels mount with the nut against the wheel as shown in the second picture.

    • The Z Wheels mount with the screw head against the wheel as shown in the third picture.

    • Return to MendelMax 3 Build Guide

Author

with 2 other contributors

Micro

Member since: 12/23/2014

601 Reputation

6 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 2

All Time: 367